Welcome To The Official Website Of Shandong Aohuang Bearing Technology Co., Ltd
Email:ll@ahfbearing.com
PRODUCTS CENTER
According to the specification is divided into two series of LM and LME series. Its code LM series used in Asia, Japan, South Korea, China, etc.On the basis of metric size, with straight axis diameter tolerance is usually h7.LME series used in Europe, the United States, Germany, Italy and other regions.On the basis of inch size. Also have metric size, with the straight axis diameter tolerance is usually g6.The two series of structural features are basically the same except for different sizes and tolerances.
The structure of the spherical plain bearing is mainly composed of an inner ring with outer sphere and an outer ring with inner sphere.The bearing is generally used for swinging motion of low speed. Due to the sliding surface of spherical shape, the bearing is used for tilted movement in certain Angle range ( the self-aligning movement),when the nonconcentricity between the supporting shaft and the shaft shell is bigger, the bearing can still work normally.
Rod end of steel and zinc coated, with male or female thread, spherical surface with bronze liner, inner ring of carbon chromium steel, spherical surface with chromium plating, can be lubricated via a nipple or a hole in the rod end. It has characteristics of large load capability, easy mounting and dismounting and mechanism simplification.
The pillow block bearing is actually a variant of the deep groove ball bearing. the outer surface of the outer ring is spherical. And it can be fitted into the corresponding concave spherical surface of the bearing seat to serve as a centering function. The outer spherical bearing is mainly used to bear the radial and axial combined load mainly based on the radial load, and generally it is not suitable to bear the axial load alone.
WhatsApp:
Email:
Office Address
Room 2611, Unit 2, Building 7, Dinghao Plaza, Gongye South Road, Gaoxin District, Jinan City, Shandong Province
