Welcome To The Official Website Of Shandong Aohuang Bearing Technology Co., Ltd
Email:ll@ahfbearing.com
PRODUCTS CENTER
Thrust roller bearings are separable bearings, can only withstand axial load and a slight impact, to limit the shaft (or shell) of the axial displacement in one direction, it can be used as single-axis to the position. But its carrying capacity is far greater than the thrust ball bearings.
Thrust ball bearing is a separable bearing, consisting of a seat washer, a shaft washer and a steel ball cage assembly. The shaft washer matched with the shaft is called the seat washer. It can only bear axial load, and the limit speed is low.
According to different occasions, can be used without inner ring of the bearing or needle roller and cage assembly, when the surface of the journal bearing surface and shell holes as bearing directly match the outer rolling surface, in order to ensure the load capacity and operating performance and have the same ring bearing, shaft or housing bore raceway surface hardness, machining accuracy and surface quality should be similar roller bearing rings. Such bearings can only bear radial load.
Needle roller bearings (needle bearing) is a cylindrical roller with a roller bearing, relative to its diameter, roller both thin and long. This is called needle roller. Despite having a smaller cross-section, has a higher load bearing capacity, equipped with a thin and long needle bearing roller (roller diameter D<5mm, L / D>2.5, L is the length of the roller), therefore radial structure is compact, its diameter size and load capacity and other types of bearings, minimum diameter, especially for radial mounting dimensions restricted support structure.
WhatsApp:
Email:
Office Address
Room 2611, Unit 2, Building 7, Dinghao Plaza, Gongye South Road, Gaoxin District, Jinan City, Shandong Province
